GERMANY BABS PETROCHEMICAL GROUP CO., LTD.

German Engineering.
Global Lubricants.

From base oil to finished blend — a 100,000-ton annual production capacity serving automotive, industrial and marine markets in more than 30 countries. The export catalog now covers DEO diesel engine oils, the GEO gasoline line and auxiliary oils for drivetrain and hydraulic service. In open-pit mining, that means lubrication built around long shifts, heavy payloads and dust-heavy service bays.

ISO 9001 19 SERIES 69 SPECS 1 L – 208 L
FIG. 03 / OPEN-PIT MINING · LUBRICATION IN THE FIELD HEAVY PAYLOADS · LONG SHIFTS · DUST-HEAVY SERVICE BAYS
6,000 m²
Automated workshop
100,000 t
Annual capacity
50,000 t
Base oil storage
30+
Export countries
10
Senior R&D engineers
PRODUCT RANGE

19 Series. Three Categories.

DEO diesel (5W-30 to 20W-50), GEO gasoline (0W-20 to 10W-60) and auxiliary oils — TO-4 multipurpose, hydraulic, gear, LSD, ATF and CVT — 69 specification combinations and 131 pack images in total, produced under the ISO 9001 quality management system.

SPECIFICATION MATRIX

Viscosity Spectrum

11 distinct SAE viscosity grades across the DEO & GEO engine oil lines — GEO supplied in 1 L / 4 L, DEO in 5 L / 20 L / 208 L. Auxiliary oil codes are listed on their own series pages.

0W
0W-200W-300W-40
5W
5W-305W-405W-20
10W
10W-3010W-4010W-60
15W
15W-40
20W
20W-50
69 SPECIFICATION COMBINATIONS · 131 PACK IMAGES · 19 SERIES · 3 CATEGORIES
APPLICATION · OPEN-PIT MINING

Built for the Long Haul

Haul trucks, excavators and wheel loaders run back-to-back shifts under dust, payload and temperature extremes. The drawing above maps the fleet, the haul roads and the lube bay; the points below are where lubrication decisions are actually made.

01 / CONDITION

Continuous Shifts

Fleet availability sets the schedule. Oil checks and changes have to fit into narrow service windows between hauls.

02 / CONDITION

High Dust Load

Airborne dust challenges intake filtration and makes clean filling practice part of every oil change in the pit.

03 / CONDITION

Heavy Payload

Sustained high load keeps sump temperatures up, so viscosity retention over the interval matters more than peak output.

04 / CONDITION

Temperature Swing

Cold starts at dawn and hot afternoons in the same shift — the grade has to be chosen against the real ambient range.

MAINTENANCE POINTS · WHERE THE OIL GOES

Engine Oil Circuit

Sump level, oil pressure and drain condition logged per unit before the shift.

Transmission & Converter

Fluid level and contamination checked against the service record, not by eye alone.

Hydraulic System

Rams, hoses and reservoir inspected for seepage before loader and excavator duty.

Final Drives & Differentials

Gear-oil level and breather condition checked on the raised service bay.

Grease Points

Pins, bushings and pivot points relubricated on the machine's own interval.

Filters & Breathers

Replaced at every drain; a blocked breather undoes a clean fill in dusty air.

Product scope — This site lists five DEO diesel engine oil series (5W-30 to 20W-50; 5 L / 20 L / 208 L), five GEO gasoline engine oil series (0W-20 to 10W-60; 1 L / 4 L) and nine auxiliary oil series — TO-4 multipurpose, hydraulic, gear, LSD, ATF and CVT (1 L to 208 L). Brake fluids and greases are not listed yet; pack images and TDS need to be supplied before those go live. Approval icons on auxiliary labels are not legible at web image size, so no API / ACEA claim is made here.
SERVICE CYCLE

Four Steps, Every Unit

A repeatable sequence for the lube bay, so the next crew knows exactly what was put into the machine and when.

01

Inspect

Walk-down before the shift: leaks, levels, breather and filter condition on each unit.

02

Sample

Draw a representative sample where the fleet log calls for it; label it with unit and hour meter.

03

Drain & Fill

Warm drain, replace filters, refill to the specified level with the grade recorded for that unit.

04

Record

Log grade, pack size, quantity and date so the next service interval stays traceable.

WHY BRABUS

Built on Capability, Proven by Scale

01

Certified Quality System

The entire process — R&D, procurement, production, packaging, storage and after-sales — is controlled under ISO 9001.

02

International Standards

Approval lines (ACEA and OEM) are printed per grade on each pack. Request the TDS for written specifications before ordering.

03

Engineering Backbone

A 500 m² standardized R&D center and 10 senior engineers behind every formulation in the catalog.

04

Global Reach

Licensed importer & exporter (CIQ 8370033000), shipping to Southeast Asia, Africa, South America, Central Asia and beyond.

Looking for a lubricant partner?

OEM, private-label and export inquiries are welcome — including fleet supply programs.

Get in Touch